Installation and application of flexible connection of high current copper braid
The flexible connection of copper braided tape is made of copper braided tape or copper strand. After the joint is crimped, it can rotate. Generally, if the current is small or the installation position is wide, we recommend to use copper braided wire for flexible connection. If the current carrying capacity is more than 1500A, we usually recommend that the customer use copper strand to ensure the flexibility of the product and increase the safety of the product Mobility. For the electrical rooms with small installation distance, we will also recommend to use copper stranded wire for soft connection. The flexible connection of copper strand is made of several fine round wires, but it is not cross woven, but intertwined like a twist, so it is solid and round in shape. Easy to weld, no angle limit, beautiful appearance. It is widely used in the soft connection of high and low voltage electrical appliances, vacuum electrical appliances, high and low voltage switch cabinets, electric welding machines, automobiles, electric locomotives, electric furnaces, mine explosion-proof electrical appliances, generator sets, carbon brush wires. Welcome new and old customers to call for consultation and order the flexible connection of copper strand, also known as the conductive belt and copper wire flexible connection; the expansion joint of copper strand, etc., adopts T2 oxygen free copper rod, which is drawn into wire by multi-channel extrusion process, the surface is bare copper or tinned or silver plated, and then woven into wire, the two ends are pressed with tinned copper tube or directly welded to form an integrated soft connection, or the two ends are connected by lugs
Copper wire material: T2 oxygen free copper
Coating: surface tin treatment
Contact surface: adopt high quality seamless copper tube, the surface can be brushed, tinned, silvered or nickel plated.
The length of the contact surface can be designed according to the installation requirements, or it can be processed into a bell mouth to prevent the cutting of the copper wire.
Crimping method: according to thickness requirements or customer drawing requirements, different presses and hydraulic presses are used for crimping.
Drilling: there is no drilling requirement in the standard design, and it can be drilled at the contact surface according to the drawing requirements.
Insulating material: no insulating material in standard design, PVC insulating sleeve can be used as required and fixed by heat shrinkage.
Special design: the lathe can be assisted according to the drawing requirements
Copper wire material: T2 oxygen free copper
Coating: surface tin treatment
Contact surface: adopt high quality seamless copper tube, the surface can be brushed, tinned, silvered or nickel plated.
The length of the contact surface can be designed according to the installation requirements, or it can be processed into a bell mouth to prevent the cutting of the copper wire.
Crimping method: according to thickness requirements or customer drawing requirements, different presses and hydraulic presses are used for crimping.
Drilling: there is no drilling requirement in the standard design, and it can be drilled at the contact surface according to the drawing requirements.
Insulating material: no insulating material in standard design, PVC insulating sleeve can be used as required and fixed by heat shrinkage.
Special design: the lathe can be assisted according to the drawing requirements
